Electronic Eyelet Button Holer
Product Description
Product Detail
Electronic eyelet button holer, special for jeans, ST-9820-02
Introduction of this Electronic Eyelet Button Holer
· Enhanced productivity with high max.sewing speed 2,500 sti/min
· Fine stitches with high-precision stitch point
· Large arm pocket allowing smooth material handling
· Easy maintenance
· Easy-to-use operation panel for everyone
Sewing shapes of this Electronic Eyelet Button Holer
|
Eyelet buttonhole |
Straight buttonhole |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
Without bartack |
Taper bartack |
Straight bartack |
Round bartack |
Without bartack |
Taper bartack |
Straight bartack |
Round bartack |
Circular stitch |
Feartures of this Electronic Eyelet Button Holer
Double chain stitch
Button
holing
Thread
trimmer
Operational Panel
Typical Application of this Electronic Eyelet Button Holer
Double chain stitch
Button
holing
Thread
trimmer
Operational Panel
|
|
|
|
|
Jacket |
Trousers |
Jeans |
Specifications of this Electronic Eyelet Button Holer:ST-9820-01
|
Specifications |
-00 |
-01 |
-02 |
|||
|
L2230 |
L1826*1 |
|||||
|
Thread Trimmer |
Upper thread trimmer |
Long thread cut |
Long thread cut |
Short thread cut |
||
|
Lower thread trimmer |
None |
Long thread cut |
Short thread cut |
|||
|
Main applications |
Ladies’ wear |
Men’s wear, Casual wear |
Jeans |
Jeans, Trousers |
||
|
Other applications |
Men’s wear, Casual wear, Jeans, Trousers |
Ladies’ wear, Jeans, Trousers |
|
|
||
|
Features |
Only the upper thread is cut by the thread trimmer. Buttonholes up to 50mm long can be sewn |
All the threads are cut long by the thread trimmers. The long thread ends can be securely held in the subsequent process. It is suitable for cases that require accurate short end or manual trimming. |
All the threads are cut short by the thread trimmers. This saves the trouble of manual trimming and reduces consumption of the thread. |
|||
|
Sewing shape |
|
|
|
|||
|
Sewing length |
Eyelet buttonhole: 8-50mm Straight buttonhole: 5-50mm |
Eyelet buttonhole: 8-42mm Straight buttonhole: 5-42mm |
22-30 mm L1422 (14-22mm)*3 L1826 (18-26mm)*3 L2634 (26-34mm)*3 L3442 (34-42mm)*3 |
18-26 mm L1422 (14-22mm)*3 L1826 (18-26mm)*3 L2634 (26-34mm)*3 L3442 (34-42mm)*3 |
||
|
Length of work clamp (standard) |
30 mm |
30 mm |
26 mm |
|||
|
Length of hammer (standard) |
22 mm |
24 mm |
20 mm |
|||
|
Length of hammer (accessory) |
30 mm |
28 mm |
24 mm |
|||
|
Sewing speed |
1,000 - 2,500 sti/min |
|||||
|
Stitch pitch |
0.5-2.0 mm |
|||||
|
Zigzag width |
1.5 - 5.0 mm (Up to 4.0 mm in mechanical, up to 5.0 mm with zigzag width compensation) |
|||||
|
Zigzag width (Factroy setting) |
2.5mm |
3.0mm |
||||
|
Taper bartack length |
0-20mm |
|||||
|
Height of work clamp |
12 mm as standard (Available up to 16 mm) |
|||||
|
Starting method |
Foot switch (Treadle type, Two-pedal type), Hand switch (Two-lever type) |
|||||
|
Feed mechanism |
Intermittent feed by 3 pluse motors (X, Y,θ) |
|||||
|
Needle*4 |
D0x558 Nm80 - Nm120 (SCHMETZ) |
|||||
|
Needle (Factory setting)*5 |
DOx558 Nm100 |
DOx558 Nm90 |
DOx558 Nm110 |
|||
|
Languages supported for operation panel |
Japanese, English, Chinese, German, French, Spanish, Italian, Portuguese, Turkish, Indonesian, Vietnamese and Russian |
|||||
|
Safty equipment |
Emergency stop function and built-in automatic stopping device activated by safety circuit in case of trouble |
|||||
|
Upper shaft motor |
AC servo motor 550W |
|||||
|
Air pressure |
Main regulator: 0.5 Mpa, Hammer pressure regulator: 0.4 Mpa |
|||||
|
Air consumption |
43.2 l/min. (8 cycles/min.) |
|||||
|
Weight |
Machine head: Approx. 120kgs, Control box: 14.2 -16.2kgs (depending on the destination) |
|||||
|
Power supply |
Signle phase 100V/200V, 3-phase 200V/220V/380V/400V, 400VA |
|||||
*1 Special specification for Chinese market
*2 When sewing the circular stitch by-02 specifications, lower threads won’t be cut
*3 Change of ranges L1422-L3422 is available by replaceing gauge parts.
*4 For Chinese market: DOx558 - NY2#12#16 (ORGAN)
*5 For Chinese market: -00:#16, -01:#14, -02:#18
Delivery and Service of this Electronic Eyelet Button Holer:
· The machines have enough stock and can delivery within 7days.
· One year guarntee in mechanism parts except the quick-wear parts, three years guarntee in electronic parts.